I looked up your Pace American trailer and it looks like it uses a standard door latch found on most trailers. I did not find any specifics on who makes the door latches or availability of replacement keys.
The easiest solution would be to replace the door latch/handle with Global Link RV Entry Door Locking Latch Kit # 295-000019. It comes with 2 Keys, door edge plate, strike plate, and installation hardware. Then in the future if keys are ever misplaced again, replacement keys will be... view full answer...
The simplest solution for you may be to have the door latch repaired so the pooch cannot push it open. If this is not a good option then a latch like # SL716 might do the trick. This spring loaded latch has a rust-resistant zinc-plated finish and it installs with hardware you supply. You'll need to install this so that the pin has a spot on the trailer door frame (or on the door) to grab. view full answer...
We offer two Replacement Handle Latches for the Universal Cam-Door Lock. We have part # 158-101. This replacement handle latch measures 4-1/4" from center hole to center hole. If you need the replacement handle latch for Universal Cam-Door Lock 383200, then this is the part you want.
We also offer Replacement Handle Latch # 158-102 which has a 4 inch distance between mounting holes. This part fits Side-Door Bar Lock Assembly 305736. view full answer...
We have the Bauer Products RV Baggage Door Slam Latch, # BA57FR. This locking latch lets you secure the baggage door using an internal plunger that eliminates the need to cut out a slot on the door edge.
Please note the linked product review and installation videos below. The installation video is not for this exact item but one that similar to and installs the same way. view full answer...
Sounds like you have a rear ramp/door on a horse trailer and need a cam style latch to hold it in place when shut. For that the 36" Lock Side-Door Bar Lock Assembly # 305736 can be used for this. It would be just a matter of mounting the assembly on top of the ramp/door to hold it up there. Or you could use two of these, one on each side and that would work as well. There are holes on the latches that you can run a padlock through like the # ML1KA.
If you have something totally different... view full answer...
Since there isn't a standard point of view some manufacturers list their handles from the inside of the RV and some from the outside, causing this confusion. When it comes to entry door handles like the Global Link RV Entry Door Locking Latch Kit # 295-000019 you were looking at the manufacturers will typically just rotate the latch to work with either a left or right handed door. This can throw off the plunger to striker plate fitment so you may have to move the striker plate in the door... view full answer...
I looked up pictures of your 1999 Featherlite trailer and it looks like the correct latch replacement you would need is the part # 295-000019. I attached an install video for this for you to check out as well. view full answer...
We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like # WS1434 and vinyl trim like # CAM25103.
Since trailer makers do not keep track of this type of part your best bet for matching up to your trailer is to simply review the items shown to find what will work on your RV. view full answer...
Yes, we currently offer a couple door handles that could would work with your 2007 Circle J horse trailer.
If you are looking for a rear door handle, the Redline lock bar assembly # 305736. It's has a 36 inch long pipe. Or the Redline # 3057-55. It will have a 55 inch long pipe.
If you are looking for side door locks, the Redline locking steel flush door latch # L3980 is easy to install and has a rustproof finish. This handle will work on doors up to 1-1/16 inches thick and can be locked... view full answer...
etrailer has what you need, but please verify the cut out measurements to ensure this is the correct fit. I think the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option in White, # 295-000021 is the right replacement. Latches tend to be fairly universal in the RV industry and this item will replace original Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door lock. The lock can even be keyed alike to match other Global Link locks.
This... view full answer...
We have the Deadbolt Latch with Inside Safety Release for Enclosed Trailers # PLR7011S which is designed for rear and side doors on an enclosed trailer. The lock can be installed on either the left or the right-side of the door. The safety release allows the lock to be disengaged from the inside. We do not have one that is listed specifically for an Interstate Cargo Trailer. view full answer...
The Redline "Junior" Locking Stainless Steel Flush Door Latch # L1883, which measures 3-5/8-inches tall x 4-3/4-inches wide, is the smallest such paddle type latch we offer. It does not come in black but could painted, although its stainless steel construction means you do not need to worry about corrosion.
The similar full-size latch # L3980 has overall dimensions of 4-1/4-inches x 5-1/2-inches. This is raw steel latch that can be primed and painted.
We do not offer windows but we do... view full answer...
I think what you are stating is that all the latches you have looked at for your entry door operate the opposite of what you need for your application. I suggest you consider the Global Link Ultra E Pro Electronic Lock for Travel Trailer w Keyed Alike Option that comes in a right hand configuration, # 295-000183 and a left hand configuration, # 295-000185.
These use the same cut out as standard travel trailer locks, 3-3/4" tall x 2-3/4" wide. This is a dual lock that lets you lock only... view full answer...
The Paneloc Slam Latch with Cover # F709-204P011 that you referenced is not available with a keeper and we don't have one that will work with it. We do have hook and keeper assemblies like the T-Style Hook and Keeper Door Holder # 37210615 that include both components but nothing for a slam latch like this one.
I have attached a link that will take you to our complete selection of trailer door parts that you can also look through. view full answer...
I contacted the manufacturer and the closest option they have for your situation is the Bauer Products Motorhome Door Lock, # BA64FR. Their line of BP12 latches is listed as fitting doors that are 1-1/4" to 1-1/2" thick. They stated that it can actually be made to fit up to 1-13/16". view full answer...
I called the supplier (Redline) and they said that all of the Redline Door Latch, # L1883, use the same key. Each latch will come with 2 keys. I also pulled 3 of them from the warehouse to verify that and they were all keyed the same.
I also have the Redline Door Latch with Inside Release, # L1833, which is the same latch but with a knob installed on the interior side of the latch to provide an inside release. view full answer...
We have the Right Hand Door Latch for Philips RV Screen Doors, # 37211205 that has mounting holes at 2-5/16" on center. If your screen door is a Philips, this will fit as the mounting holes are only 1/16" from the on center measurement you provided. view full answer...
We have a number of striker latches available, like the Lippert Standard Baggage Door Latch Kit # LC317649. Your picture doesn't necessarily tell me what you need. If you wanted to provide some more context or provide alternate pictures I would be happy to look further into the latch that you need. view full answer...
Yes, the 642066 is listed as the Lippert Slam Latch for RV Doors with Keyed Alike Option - Black # LC66UD. This Lippert slam latch for RV doors has a sturdy steel construction with rust-resistant black powder coat finish and the lock can be keyed alike to match other Lippert locks. view full answer...
Because this part is meant as a replacement, the cam latch or lever isn't provided. The idea is that the old one would be reused. Camco does offer the same product that would include both a straight and an offset latch, part # CAM44323. The threaded barrel is 7/8 of an inch thick, and would be compatible with most RV storage compartment doors. view full answer...
Go To Results